How to Keep the Pavement Around a Fuel Station in Optimum Condition

If you’re going to invest in a fuel station, you’ll need to protect the foundation because it’s a vital component that helps motorist maneuver near and around the pumps. When a pavement has flaws, all tires that travel around a fuel station will be at risk, which is why the top gas station owners always take strategic steps to protect paths that lead to their store, entrance, exit, and pumps. If you want to maintain a tidy pavement like seasoned fuel station businesses, you’ll need to implement tactical procedures to get rid of the three things that harm customers’ tires.

Oil

Before you can tackle oil stains, you must determine whether or not they’re wet or dry. Typically, you should start the cleaning process while oil stains are dry because the cleaning agents will work better. When you’re ready to clean, pour water and baking soda on a stain, and scrub the spot with a brush that has stiff bristles. After the stain is gone, rinse the pavement with a hose, and give the surface time to dry.

Gum

A piece of gum will lift off a pavement very easily after it’s cold. You can drop a wad of gum’s temperature with ice. After the gum hardens, wedge a putty knife underneath the goo and remove it.

Gas

Gas stains can produce a scent when it lingers on a pavement. To remove this type of stain, you’ll need an absorbent product, such as cornstarch or baking soda. Let either of these solutions set on the stain for 15 minutes. Then, sweep the debris off the pavement with a broom. Finally, pour a dry cleaning solvent on the stain, and blot the spot gradually with a sponge until the solvent dissolves.

By getting rid of pavement stains following a fuel station construction, you’ll attract many customers. If you want to speed up daily cleaning routines, consider investing in a pressure washer.

Related posts

Leave a Comment